Custom-made GRP grating (ATEX)
ATEX GRP gratings made to measure, also antistatic / conductive
Also as ATEX-compliant, antistatic and ESD-dissipative GRP gratings in particularly slip-resistant Variant (R13) available. If required with assembly or cutting. Suitable for Roofs, chemical plants, warehouses, airfields, water treatment, electricity, port facilities, railways and shipbuilding.
Assembly and cutting service for GRP gratings
Minimum quantity: 10 pieces
The following options / accessories / services for the Grating made of glass fiber reinforced plastic are offered:
1) Cutting
2) Grids or closed surfaces as panels or laminate boards (available in thicknesses from 3 to 10 mm)
3) Fastening materials (such as clamps and washers) and angle frames
4) Adjustable base feet
5) Assembly service
6) Made from special resins, e.g. particularly acid or alkali resistant for extremely aggressive environments, particularly fire retardant made from self-extinguishing resins
What are the advantages of GRP gratings?
- A high mechanical strength comparable to steel.
- A very long lifespan, at absolute corrosion resistance and resistance to aging.
- A near-perfect Maintenance-free.
- Optimal occupational safety, even in the most adverse environments (lubricating greases, oils and waxes) thanks to the non-slip, integrated sanding that remains constant throughout its entire lifespan (R13-V10 according to DIN 51130).
- A low weight (50% less weight compared to similarly load-bearing metal grates): this means easier installation and handling of the material and thus also brings cost savings.
- The anti-magnetic and electrically insulating properties (or alternatively also conductive / ATEX suitable available)
- The GRP gratings are fire-retardant according to EN 13501-1 as Bfl-s1 checked.
Alternative to Custom-made GRP gratings we also offer Custom-made steel gratings for industry and shipbuilding on.
Certifications
|
CONTENTS |
STANDARD |
CERTIFICATION BODY |
CLASS/NORM |
|
MANUFACTURER'S QUALITY SYSTEM |
UNI EN ISO 9001: 2008 |
DNV |
Certified |
|
|
ASTM E84 |
SGS |
Class A (FSI <25) |
|
|
ASTM D635 |
SGS |
CC1 |
|
FIRE RESISTANCE
|
NF P 92-501 |
SNPE |
M1 |
|
EN ISO 9239-1 |
SNPE |
Bfl |
|
|
DIN 4102-1 |
SIEMENS |
B1 |
|
|
SMOKE DEVELOPMENT |
ASTM E84 |
SGS |
Class A (SDI <450) |
|
NF F 16-101 |
SNPE |
F1 |
|
|
EN 13501-1 |
SNPE |
s1 |
|
|
SLIP PROTECTION |
DIN 51130 |
Modena Centro Prove srl |
R13-V10 with sanded surface R13-V10 with concave surface |
|
Grating Properties |
DIN 24537-3 |
- |
compliant |
|
CORROSION TEST |
UNI EN ISO 9227 |
CSI |
Properties remain consistent without complaint |
|
AGING RESISTANCE (UVB) |
ASTM G 154 |
SSOG |
Properties remain consistent without complaint |
|
FOOD AUTH |
Ministerial approval |
ASL - Milan |
Suitable |
|
CONDUCTIVITY
|
IEC 61340-5-1 |
Electra |
Suitable for EX AREA |
|
|
ABS |
L 2* - L 3* |
|
|
NAVAL APPLICATION
|
INSTALLATION CERTIFICATE
|
BUREAU VERITAS |
L 2* - L 3* |
|
RINA |
compliant |
||
|
USCG |
L 2* - L 3* |
||
|
RAILWAY AREA |
DIN 24537-3 |
EBA (Federal Railway Authority) |
compliant with standards |
|
TM 2010-354 |
SKZ TeConA GmbH (South German Plastics Center) |
compliant with standards |
|
|
UNI CEI 11170-3 Ed. 2005 + FA 2007 |
Lapi SpA |
LR4 included |
|
|
SHIP AREA / OFFSHORE |
IMO 2010 FTP Code Part 5 and 2 |
DNV-GL |
Type Approval |
|
IMO MED Annex A.1/3.18 © |
Lapi SpA |
Module B |
|
|
SLIP RESISTANCE |
ASTM D4060-10 Taber Abraser |
SSOG |
no risk of injury (with sanded surface) |
* Certification and conformity with bisphenol resins