Earth screws

Ground anchors for screwing in , ground screws or screw anchors are used in various applications, such as:

• Stable ground screw foundation : Perfect solution for garden sheds, pavilions, greenhouses, patios and carports, for permanent or temporary applications (reusable if not damaged), immediately load-bearing even in winter.

• Guying of masts : Ground anchors are used to securely anchor masts to the ground and absorb tensile forces. This is particularly important in situations where high stability and safety are required, for example, when installing antenna masts or temporary structures such as event stages.

• Vehicle recovery : Ground anchors can serve as anchor points to secure vehicles during recovery or rescue operations. They provide reliable anchoring in the ground to absorb tensile forces and enable the safe towing or moving of vehicles across rough terrain.

• Moving loads across uneven terrain : Ground anchors are frequently used in logistics and transport to secure loads on uneven terrain. They serve as a fixed anchor point to distribute the tensile force and prevent the load from slipping or sliding.

• Agricultural applications : In agriculture, ground anchors are often used in hop cultivation, viticulture, or to secure newly planted or weak trees. They offer additional stability and protection against strong winds or other environmental influences.

• Anchoring tents and tarpaulins : In smaller versions, ground anchors are used to firmly secure tents, tarpaulins, or awnings to the ground. This ensures a safe and stable structure, especially in windy conditions.

• Robust fence or construction fence anchors , especially when equipped with privacy screens and noise-reducing mats : A secure solution for privacy and noise protection to prevent construction fences from falling over, e.g., during storms. Also suitable as a foundation for fence posts.

• Anchoring on the beach : Stable hold for tents, sun sails, parasols and beach equipment.
• Anchoring photovoltaic systems / PV systems in the ground: possibly without VAT : Is your system for private use and under 30kW? Then you can buy the screw foundations and brackets from us VAT-free WITHOUT 19% VAT! Simply write a short confirmation in your

  Ground anchors are available in various sizes (60 cm, 80 cm and 100 cm lengths) and designs to meet the requirements of different applications. They offer a simple and effective way to safely absorb tensile forces in the ground and serve as reliable anchor points in various areas.

  Technical data

  
  Maximum permissible loads when the component is installed vertically in semi-solid loamy soil
  soils

  Load / Length	60cm	80cm	100cm
  Axial pressure load	2.5 kN	3.5 kN	4.5 kN
  Axial tensile load	1.25 kN	1.75 kN	2.25 kN
  Shear force	0.5 kN	1 kN	1.25 kN
  Bending moment	325 Nm	325 Nm	325 Nm
  Torsional moment during Screw in with Bolt d=18mm	400 Nm	400 Nm	400 Nm

  The specified maximum values refer to foundations installed in the specified soil group with a maximum overhang of 5cm above ground level according to the manufacturer.

  Note: No liability is assumed! The enclosed instructions and safety information must be strictly observed!
  

  Material: Galvanized stainless steel

  Installation instructions for screw-in ground screws / ground anchors
  

  Only assemble while wearing work gloves!

  
  Preparation:
  - Measure foundation points.
  - For flush installation, the turf or soil must be removed in a circle of
  The soil should be removed approximately 30 cm around the foundation and approximately 5 cm deep. This ensures a
  Deep screwing in with the (optionally available) screwing rod.
  

  Laying the foundation:
  - If necessary, reinforce foundation points with an iron bar or the (optional)
  Drive the available insertion rod into the ground. On very hard floors, it may be necessary to use a...
  Pre-drill with a large masonry drill bit (D = 35mm max.). Use the appropriate drill bit.
  Available from us as accessories.
  - Push the insertion rod through the side openings of the foundation and center it
  Position. Using both hands, screw in the screw foundation until it engages and
  can no longer be moved by hand.
  - The insertion rod can then be inserted with the angled side into the same
  The foundation opening is inserted. The screwing is then done with both hands on the...
  Extend the rod to the desired depth.
  - Please ensure that all foundations are screwed to the same height.

  maintenance
  It is recommended to inspect the structure for damage every 5 years and take corrective action if necessary.
  Create. Damaged components must be repaired or replaced.

  The ground screws are also available by the pallet for bulk buyers upon request. available.

  Submit a request