Parking space marking (wear-resistant)

Parking space markers for marking pallet spaces and hall marking

Self-adhesive floor markers/parking space markers made of extremely durable plastic. These hall markers are quick to apply, easy to clean, and wear-resistant. They replace floor markings made of marking paint or spray. These self-adhesive parking space markers are perfect for marking lines – the beginning and end of routes, for demarcating work areas and storage areas, for marking transport routes, halls, etc. These parking space markers can be applied to clean, grease-free, and dry surfaces indoors. For indoor use only! The surface must be clean, grease-free, dust-free, and dry. Installation is very easy: remove the backing paper (adhesive cover) and press the floor marker firmly onto the floor. The parking space markers can be cleaned with water and normal cleaning agents. They are resistant to weak acids and bases. The floor marking strips can be easily removed from the floor by firmly peeling them off, leaving almost no residue. Forklifts and pallet jacks can drive over the floor markings.

Turning and maneuvering on the floor markings with forklifts and similar heavy vehicles must be avoided, as this will damage the material. We accept no liability for mechanical damage! Suitable for indoor use only (for outdoor use, we recommend DD-5610 made of aluminum) .

Material: Polycarbonate (very durable and wear-resistant) for smooth and crevice-free surfaces
Leg width: 5 cm or 7.5 cm

Custom orders with other color combinations (e.g. red/white or blue/white) are possible upon request.

Packaging unit: 25 pieces

Dimensions:

Thickness: 0.7 mm

For a 5 cm thigh width:

L-piece: 100 x 100 mm

T-piece: 100 x 150 mm

X-piece: 150 x 150 mm

Longitudinal piece: 100 mm

Round / circle / ground marker point: 50 mm diameter

For a thigh width of 7.5 cm:

L-piece: 125 x 125 mm

T-piece: 125 x 175 mm

X-piece: 175 x 175 mm

Longitudinal piece: 125 mm

Round / circle / floor marking point: 75 mm diameter