Schwerlaststütze
Heavy-duty supports max. 400 kN / 40 t at 11 m height
Schwerlaststütze
Schwerlaststütze
Schwerlaststütze
Schwerlaststütze
Heavy-duty supports max. 400 kN / 40 t at 11 m height
Schwerlaststütze
Schwerlaststütze
Schwerlaststütze
Schwerlaststütze
Schwerlaststütze
Heavy-duty supports max. 400 kN / 40 t at 11 m height
Schwerlaststütze
Schwerlaststütze
Schwerlaststütze
Schwerlaststütze
Heavy-duty supports max. 400 kN / 40 t at 11 m height
Schwerlaststütze
Schwerlaststütze
Schwerlaststütze
Schwerlaststütze

Heavy-duty support

Heavy-duty support for up to 40 t

The heavy-duty support column, at a maximum height of 11.3 m , still has a load-bearing capacity of approximately 400 kN or 40 t . The column consists of one or two height-adjustable end pieces with spindles , extendable middle sections, and a top piece. The middle sections are available in heights of 0.156 m, 0.312 m, 0.625 m, 1.25 m, and 2.50 m.

Heavy-duty supports request

Is our heavy-duty support oversized for your application? More cost-effective, lower load-bearing (110 kN to 270 kN depending on the support height), height-adjustable construction supports for heavy loads, but with a similar length (11 m), can be found here.

 

Height -adjustable steel supports for heavy loads in construction with spindle and movable base plate

Heavy-duty supports in galvanized steel construction, available in variable lengths, are designed to bear heavy loads. Centering pins simplify the assembly of multiple elements together and with the end pieces, ensuring correct positioning and allowing for easy connection through pre-drilled holes in the base plates.

The end piece of the heavy-duty support features a spindle with a movable base plate and a mounting base plate for adapting the middle sections via a centering pin. It has an adjustment range of 445–665 mm, adjustable via a star wheel, and can be used for both the head and foot sections. The support is constructed of very stable steel. This allows for fine adjustment of the heavy-duty support .

The steel supports for heavy loads have the following properties:

  • Use as a steel support in scaffold construction and in formwork for transferring vertical loads
  • The combination of different length center sections allows for any support height from 1.2 m – 11.3 m ( height adjustable via spindles )
  • Load-bearing capacity of the heavy-duty support up to approx. 40 t (400kN) at a support height of 11.3 m.
  • The steel support for heavy loads is used to support heavy structures, e.g. in tunnel construction, bridge construction or building construction or in formwork work.
  • This Steel supports may be used in design class B1 according to DIN EN 12812.



Height of the heavy-duty supports

FAQs about heavy-duty supports

1. What are heavy-duty columns? Heavy-duty columns are robust steel structures used in various construction applications to support and stabilize heavy loads.

2. What are heavy-duty supports used for? Heavy-duty supports are used, for example, in scaffolding construction and formwork to transfer vertical loads and support heavy structures such as tunnels, bridges, or buildings during the construction phase.

3. What heights are possible with heavy-duty supports? By combining different length center sections, heavy-duty supports can reach heights from 0.9 to 11.3 m. (Please inquire if greater heights are required.)

4. What is the load-bearing capacity of the heavy-duty supports? Heavy-duty supports can withstand loads of up to approximately 40 tons (400 kN) at a support height of 11.3 m.

5. What safety classification do heavy-duty supports have? According to DIN EN 12812, the scaffold supports may be used in design class B1 and comply with the safety standards for commercial use.

6. What safety precautions must be observed when assembling heavy-duty supports? Before assembly, all components must be checked for damage. Assembly must be carried out according to the instructions and only authorized personnel may perform it. National occupational safety regulations and measures to prevent health hazards must be observed. The assembly instructions must be followed without exception.

7. How are heavy-duty supports assembled? Assembly requires careful alignment of the individual components according to the instructions. The end pieces with spindles must be securely fastened, and the middle sections must be correctly connected to achieve the desired height. Please refer to the enclosed assembly instructions for more detailed information.

8. What technical data are relevant for heavy-duty supports? The dimensions and materials of the individual components, as well as the load-bearing capacity, are important technical data that must be considered when selecting and using heavy-duty supports. The height of the supports also negatively affects their load-bearing capacity.

These FAQs provide a basic introduction to heavy-duty supports and offer guidance on their safe use and installation. Please refer to the manufacturer's specific instructions and safety guidelines for each product.

Heavy-duty supports request

DD-SCHK-70800