Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil
Bodenindikatoren taktil

Tactile floor indicators (plastic)

Floor indicators / plastic studs for sticking / gluing on as a tactile guidance system for the blind

  • Tactile floor indicators for sticking on, made of plastic studs
  • Easy installation using installation templates
  • Suitable for indoor and outdoor use
  • Tactile paving for the visually impaired, also for retrofitting

Send an enquiry

 

Tactile floor indicators as a guidance system made of colored plastic and self-adhesive

Available versions of the tactile plastic studs: Self-adhesive, without glue, with pin

For the self-adhesive version, there are different adhesives available, depending on the application/surface.

Studded tiles "without adhesive" can be glued during installation using a liquid adhesive that is adapted to the substrate.

Tactile studs with pins are installed by drilling holes into the floor and then bonding them with polyester resin. This installation method is particularly recommended for outdoor areas, uneven surfaces, or areas subject to heavy loads.

Mounting templates for floor indicators are available as accessories.

Tactile studs in diameters of 25 mm, 30 mm, 35 mm

Available heights: 3.3 mm, 5 mm (5 mm is recommended as it is more noticeable, especially outdoors)

Consumption per 30 x 30 cm using 30 mm studs: 36 studs laid orthogonally, 50 studs diagonally.

The following standard specifications must be observed with regard to the number of studs per attention field and the choice of color:

  • DIN 32984:2020-12: Tactile paving in public spaces
  • DIN 18040-3: Barrier-free construction in public transport and open spaces
  • DIN 32975 - Contrasts in public spaces
  • H BVA (FGSV guidelines for barrier-free transport facilities)

Standard colors:

Colors for tactile plastic studs

  • Yellow / Signal yellow RAL 1003
  • Ivory RAL 1014
  • Red / Signal red RAL 3001
  • Blue / Signal Blue RAL 5005
  • Grey / Signal Grey RAL 7004
  • Dark grey / slate grey RAL 7015
  • Light grey RAL 7035
  • Black / Signal Black RAL 9004

Other colors/special colors and transparent elements are available upon request. A strong color contrast with the background is particularly important for visually impaired people.

Available shapes/surfaces: flat truncated cone, truncated cone with lines, truncated cone with bumps (especially recommended for outdoor use), dome shape

Material: Polyurethane (PU)

Flame-retardant (Bfl-s1 according to EN ISO 9239-1)
Slip-resistant (R11)

For more information on the correct design of tactile paving systems for the visually impaired: Guidelines for the practical application of DIN 32984. Please note that a new version of the DIN standard will be available from December 2020.

DD-Bodenindikatoren-Kunststoff